Analysis of stress in the walls of simulated artificial root canals during instrumentation with Reciproc system: a pilot study using a photoelastic model

Autores

  • Ana Elisa Vilela Department of Odontology – University of Taubaté – Taubaté – SP – Brazil.
  • Denise Pontes Raldi Department of Odontology – University of Taubaté – Taubaté – SP – Brazil.
  • Flavia Goulart Rosa Cardoso Department of Odontology – University of Taubaté – Taubaté – SP – Brazil. Institute of Science and Technology – UNESP – Univ Estadual Paulista – School of Dentistry – Department of Restorative Dentistry – São José dos Campos – SP – Brazil.
  • Cristiane Aparecida de Assis Claro Department of Odontology – University of Taubaté – Taubaté – SP – Brazil.
  • Sandra Márcia Habitante Department of Odontology – University of Taubaté – Taubaté – SP – Brazil.

DOI:

https://doi.org/10.14295/bds.2016.v19i3.1278

Resumo

Objective: The aim of this pilot study was to perform in vitro analysis of the stress related to instrumentation of artificial root canals with Reciproc System by using the photoelasticity method. Material and Methods: Photoelastic models consisted of two epoxy resin blocks simulating root canals, which were attached with cyanoacrylate adhesive to a base and placed at the centre of a circular polariscope in a dark-field configuration. The Reciproc R25 instrument was mounted to a VDW motor and used in block 1 up to 12 mm (working length) and then the same instrument was used in block 2. The images were captured by video camera and analysed at the time of the fourth penetration. Isochromatic fringes were observed in the cervical, middle and apical thirds at mesial and distal regions of each block. Therefore, they were divided into cervical-mesial (CM), cervical-distal (CD), middle-mesial (MM), middle-distal (MD), apical-mesial (AM) and apical-distal (AD). Results: In the first instrumentation, it was found that the greatest stress occurred at the middle-distal region (1.38), followed by middle-mesial (1.20), apical-distal (1.20) and apical-mesial regions (1.20). In the second instrumentation, the greatest stress occurred at the middle-mesial (1.20), apical-distal (1.20), apical-mesial (1.20) and middle-distal regions (0.90). Conclusion: The greatest stress occurred in the middle and apical thirds during the first instrumentation. Re-utilization caused less stress.

 

Keywords

Dental Stress Analysis; Endodontic; Instrumentation.

 

Downloads

Não há dados estatísticos.

Downloads

Arquivos adicionais

Publicado

2016-09-29

Como Citar

1.
Vilela AE, Raldi DP, Cardoso FGR, Claro CA de A, Habitante SM. Analysis of stress in the walls of simulated artificial root canals during instrumentation with Reciproc system: a pilot study using a photoelastic model. BDS [Internet]. 29º de setembro de 2016 [citado 4º de outubro de 2025];19(3):88-93. Disponível em: https://ojs.ict.unesp.br/index.php/cob/article/view/1278

Edição

v. 19 n. 3 (2016): Jul. - Sep. / 2016 - Published September 2016

Seção

Artigos de Pesquisa Clínica ou Laboratorial

Licença

TRANSFERÊNCIA DE DIREITOS AUTORAIS E DECLARAÇÃO DE RESPONSABILIDADE



Toda a propriedade de direitos autorais do artigo "____________________________________________________________________" é transferido do autor(es) para a CIÊNCIA ODONTOLÓGICA BRASILEIRA, no caso do trabalho ser publicado. O artigo não foi publicado em outro lugar e não foi submetido simultaneamente para publicação em outra revista.

Vimos por meio deste, atestar que trabalho é original e não apresenta dados manipulados, fraude ou plágio. Fizemos contribuição científica significativa para o estudo e estamos cientes dos dados apresentados e de acordo com a versão final do artigo. Assumimos total responsabilidade pelos aspectos éticos do estudo.



Este texto deve ser impresso e assinado por todos os autores. A versão digitalizada deverá ser apresentada como arquivo suplementar durante o processo de submissão.


Plaudit

Crossref
Scopus
Google Scholar
Europe PMC