Qualitative and quantitative wear rate analysis of direct restorative materials
DOI:
https://doi.org/10.14295/bds.2003.v6i2.314Resumen
The aim of this in vitro study was to analyze the wear rate of three direct restorative materials (Dispersalloy,Z250 and Surefil) using two methods of evaluation: visual M-L scale and profilometry. The occlusal surfaces of twelve human molars were ground flat using diamond disc. Standardized cavities were prepared using nº 721PM diamond bur and restored according to the manufacturers’ instructions. They were then stored in distilled water at 37ºC for 24 hours, polished, replicated and mechanical cycled. Wear assessment was performed using the ML scale and profilometry. Different values were observed for the tested materials depending on the method of evaluation. For the M-L scale no difference was found among Dispersalloy, Surefil and Z250, whereas the profilometer showed that Dispersalloy had lower wear than Surefil and Z250 (p<0.01). The M-L scale demonstrated poor accuracy when compared to the profilometer method (p<0.05) to evaluate the wear rate of restorative materials.Descargas
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Brazilian Dental Science uses the Creative Commons (CC-BY 4.0) license, thus preserving the integrity of articles in an open access environment. The journal allows the author to retain publishing rights without restrictions.
=================
COPYRIGHT TRANSFER AND RESPONSIBILITY STATEMENT
(PDF)
For all articles published in the BDS journal, copyright is retained by the authors. Articles are licensed under an open-access Creative Commons CC BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted, provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit. All metadata associated with published articles is released under the Creative Commons CC0 Universal Public Domain Dedication.
Before the submission, authors must obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) that does not fall into the public domain or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).
The authors hereby attest that the study is original and does not present manipulated data, fraud, or plagiarism. All names listed made a significant scientific contribution to the study, are aware of the presented data, and agree with the final version of the manuscript. They assume complete responsibility for the ethical aspects of the study.
This text must be printed and signed by all authors. The scanned version should be submitted as supplemental file during the submission process.
