Effect of bench-delay after flask cooling on the posterior teeth movement in maxillary complete dentures
DOI:
https://doi.org/10.14295/bds.2003.v6i1.185Abstract
The aim of this investigation was to verify the influence of bench-delay on posterior teeth shift after denture storage in water at temperature of 37ºC, when the flask was cooled in curing water bath. Ten maxillary complete dentures were constructed with Clássico heat-cured acrylic resin using the conventional method of packing in metallic flasks. Metallic reference pins were placed in the labial cusp of the first pre-molars (PM), and mesiolabial cusp of the second molars (M). The acrylic resin was polymerized twelve hours after final flask closure in a water bath cycle at 74ºC for 9 hours. The flasks were removed from the thermo-polymerizing unit after watercooling, and remained stored on the bench for 3 hours. After deflasking and finishing, the dentures were stored in water at temperature of 37ºC for periods of one week, one month, and three months. After deflasking and storage period tested, the PM-PM (pre-molar to pre-molar), M-M (molar to molar), LPM-LM (left pre-molar to left molar) and RPM-RM (right pre-molar to right molar) distances were measured with a STM Olympus microscope, with an accuracy of 0.0005mm. Collected data were submitted to ANOVA and Tukey´s test (5%). No statistically significant difference was noted in the posterior teeth shift in all distances, when the deflasking period was compared with the periods of water storage.Downloads
Downloads
Published
How to Cite
Issue
Section
License
Brazilian Dental Science uses the Creative Commons (CC-BY 4.0) license, thus preserving the integrity of articles in an open access environment. The journal allows the author to retain publishing rights without restrictions.
=================
COPYRIGHT TRANSFER AND RESPONSIBILITY STATEMENT
(PDF)
For all articles published in the BDS journal, copyright is retained by the authors. Articles are licensed under an open-access Creative Commons CC BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted, provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit. All metadata associated with published articles is released under the Creative Commons CC0 Universal Public Domain Dedication.
Before the submission, authors must obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) that does not fall into the public domain or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).
The authors hereby attest that the study is original and does not present manipulated data, fraud, or plagiarism. All names listed made a significant scientific contribution to the study, are aware of the presented data, and agree with the final version of the manuscript. They assume complete responsibility for the ethical aspects of the study.
This text must be printed and signed by all authors. The scanned version should be submitted as supplemental file during the submission process.
