Titanium Dioxide and Polyethylmethacrylate electrospun nanofibers: assessing the technique parameters and morphological characterization

Autores

  • Jessica Dias santos São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – Department of Dental Materials and Prosthodontics – SP – Brazil.
  • Tabata Prado Sato São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – Department of Dental Materials and Prosthodontics – SP – Brazil.
  • Aline Lins de Lima São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – Department of Dental Materials and Prosthodontics – SP – Brazil.
  • Andrea Souza Nogueira São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – SP – Brazil.
  • Cristiane Campos Costa Quishida São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – SP – Brazil.
  • Alexandre Luiz Souto Borges São Paulo State University (Unesp) – Institute of Science and Technology, São José dos Campos – Department of Dental Materials and Prosthodontics – SP – Brazil.

DOI:

https://doi.org/10.14295/bds.2019.v22i1.1630

Resumo

This work studied the synthetization and morphological characterization of Polyethylmethacrylate (PEMA) nanofibers (NFs) containing titanium dioxide (TiO2) produced by the electrospinning technique. The solution to produce the nanofibers was prepared by dissolving 2.5g PEMA in 6.75mL of 1.1.2.2- tetrachloroethane and 3.375mL of dimethylformamide (DMF), and 0.405g of TiO2 was added to the solution. The nanofiber production used different distances between the tip of the needle to the collector (10, 12 and 15 cm) and two flow rates (0.05 mLh-1 and 0.08 mLh-1) were employed, while the applied voltage was 17kV. The NF morphology was analyzed by Scanning Electron Microscopy (SEM) and Image J software. We used Fourier Infrared Spectroscopy (FTIR) and Energy Dispersive X-Ray Spectroscopy (EDS) to evaluate the structural properties. All parameters were effective in the NF production, however it was shown that the distance of 12 cm produced the best NFs. The mean diameters showed no statistically significant difference between the samples. The FTIR analysis showed characteristic peaks of PEMA and TiO2. It was concluded that the employed method was efficient for NF production containing PEMA and TiO2,and the morphological characteristics of the NFs were influenced by the voltage and distance.

Keywords

Polymer; Fibers; Electrochemistry.

Downloads

Não há dados estatísticos.

Downloads

Arquivos adicionais

Publicado

2019-01-31

Como Citar

1.
santos JD, Sato TP, Lima AL de, Nogueira AS, Quishida CCC, Borges ALS. Titanium Dioxide and Polyethylmethacrylate electrospun nanofibers: assessing the technique parameters and morphological characterization. BDS [Internet]. 31º de janeiro de 2019 [citado 7º de setembro de 2025];22(1):70-8. Disponível em: https://ojs.ict.unesp.br/index.php/cob/article/view/1630

Edição

v. 22 n. 1 (2019): Jan. - Mar. / 2019 - Published January 2019

Seção

Artigos de Pesquisa Clínica ou Laboratorial

Licença

TRANSFERÊNCIA DE DIREITOS AUTORAIS E DECLARAÇÃO DE RESPONSABILIDADE



Toda a propriedade de direitos autorais do artigo "____________________________________________________________________" é transferido do autor(es) para a CIÊNCIA ODONTOLÓGICA BRASILEIRA, no caso do trabalho ser publicado. O artigo não foi publicado em outro lugar e não foi submetido simultaneamente para publicação em outra revista.

Vimos por meio deste, atestar que trabalho é original e não apresenta dados manipulados, fraude ou plágio. Fizemos contribuição científica significativa para o estudo e estamos cientes dos dados apresentados e de acordo com a versão final do artigo. Assumimos total responsabilidade pelos aspectos éticos do estudo.



Este texto deve ser impresso e assinado por todos os autores. A versão digitalizada deverá ser apresentada como arquivo suplementar durante o processo de submissão.


Artigos mais lidos pelo mesmo(s) autor(es)

1 2 3 > >>